Elegant and powerful

The lifting column SL consists of two anodized aluminium profiles, guided by plastic gliders. Each lifting column has an internal motor that drives a threaded spindle. The cable length is 1.8 metres. The T-slots on 3 sides (width 8 mm) of the lifting column allow the addition of crossbars, shelves, attachments and mountings.

Up to 3 (4) lifting columns can be connected to one control unit. When a maximum of 4 control units are synchronised, up to 12 lifting columns can be operated synchronously. The choice of system load defines the type of control unit (see system combination).

Optional is an ESD (electrostatic discharge) version of the SL system.

Downloads

PDF Download Table Base Frame Applications

Overview

  • Stability: 5/5
  • Cross Section: 260 x 60mm
  • Installation: 530mm - 630mm
  • Lifting Distance: 300mm - 400mm
  • Hydraulic Lifting System: TL
  • Max System Load (Hydraulic): 1500 N - 2500 N
  • Spindle Lifting System: SL
  • Max System Load (Spindle): 2000 N - 3000 N

Technical Data

  • Lifting Capacity: Max. lifting load per 1SL - 2000 N
    Max. lifting load per 2SL - 4000 N (6000 N)
    Max. lifting load per 3SL - 4000 N (6000 N)
    Max. lifting load per 4SL - 10,000 N
  • Max. static bending moment: Mbx = 450 Nm
    Mby = 1,200 Nm
  • Max. dyn. bending moment: Mbxdyn = 200 Nm
    Mbydyn = 550 Nm
  • Stroke length: Stroke length - 300 mm (11.8”) or 400 mm (15.74”)
    SL length A - 530 mm (20.87”) or 630 mm (24.81”)
  • Max Speed: 12 mm/s (9 mm/s –high load capacity)

Inquire about these products